Products


Tyre Changers:

    S7645 – S7645V – S7645D

    AUTOMATIC TYRE CHANGERS   Tool with intergrated protection for alloy rims. Adjustable angle and rotation. Bead breaker The bead breaker opening can be adjusted to work with extreme rapidity. Jointed and shaped blade to facilitate bead... Read More

    S916EVO

    SUPER FAST TRUCK TYRE CHANGER The S916EVO is a one-of-a-kind. It is equipped with four rollers with a unique form, positioned on the two sides of the wheel in diametrically opposite positions. With this system,... Read More

    SRS926.MOVI

    TYRE CHANGER FOR ROAD-SIDE SERVICE HYDRAULIC TILTING   Retractable truck tyre changer suitable for closed vans. Ideal for road-side tyre service, it is suitable for both truck and also for agricultural tyres. Electro-hydraulic movements. Hydraulic... Read More

    SRS926

    TYRE CHANGER FOR ROAD-SIDE AND WORKSHOP SERVICE   Truck tyre changer for both road-side and workshop service, suitable for closed vans and/or small workshops. Controls on consolle. MINIMUM HEIGHT 330 mm (13”) MINIMUM CLAMPING Ø 90... Read More

    S960EI – S960N

    The operating dimensions of the clamping unit and of the head-tool carriage allow to work on the whole range of wheels, including super-single. The controls, with lever type hydraulic distributors, enable to regulate the speed... Read More

    S9156.13SA – S9156.13I – S9156.13N – S9156.11N

    Electrohydraulic tyre changer for trucks, agricultural and earthmoving vehicles.   S9156.13EI Controls on mobile unit S9156.11N Controls with lever type hydraulic distributors. S9156.13N Controls with lever type hydraulic distributors   MINIMUM HEIGHT MINIMUM CLAMPING Ideal... Read More

    S10156.15

    Electrohydraulic tyre changer for trucks, agricultural and earthmoving vehicles with rims between 11” and 56”. The chucking table can accommodate rims up to 43” without extensions. S10156.15N QUICK MANUAL ROTATION   Hydraulic controls on aerial... Read More

    S9256.11SL – S9256.11ST

    DOUBLE ROTATION SPEED   Double speed for chucking table rotation   DOUBLE SPEED MOVEMENTS   Double speed on hydraulic movement             AUTOMATIC LIFTING AUTOMATIC MOVEMENTS QUICK MANUAL ROTATION    TECHNICAL DATA... Read More

    S10360.15 – S9256.15

    Electrohydraulic tyre changer for trucks, agricultural and earthmoving vehicles. The dimensions and work strokes are such as to ensure maximum efficiency for the entire range of tyres. STAND-BY FUNCTION After 5 sec. the machine has... Read More

    S7240.BIKE

    Tyre changers designed to handle motorcycle wheels.       TECNICAL DATA S7240.BIKE Operating pressure 8 – 10 bar Motor: Three phase 0,55 kW Chuck rotation speed (rev/min) 7,3 Max. torque to chuck 1200 Nm Clamping... Read More

    S7240

    SEMI-AUTOMATIC TYRE CHANGERS S7240.20 S7240.22 Heavy duty structure. Rigid self-centering chuck and wide clamping range.   Tool with intergrated protection for alloy rims The pedal assembly can be removed allowing easy servicing.   TECNICAL DATA S7240.20... Read More

    S6441 – S7441

    AUTOMATIC tyre changers   • Heavy duty structure to guarantee proper working conditions at all times. • Metal side cover • Grease bucket support   Tool with intergrated protection for alloy rims The pedal assembly... Read More

    S116.30

    06COMPLETELY LEVERLESS AUTO-TOUCH function • Wheel diameter up to 45” • Rim diameter from 10” to 30” • Rim width up to 15” The central rim locking system, suitable also for reverse rims (no need... Read More

    S7641 – S7641V – S7641D

    AUTOMATIC tyre changers   Jointed and shaped blade to facilitate bead breaking. Galvanised cylinder with double operation Bead breaker The bead breaker opening can be adjusted to work with extreme rapidity.   TECNICAL DATA S7641.24... Read More

    S8645 – S8461

    Patented lever-free tool   Fits between the tyre and rim and takes hold of the bead, gradually lifting it without the aid of bead-lifter levers.             The exclusive working movement... Read More

    S106C.EL – S104C.EL

    CENTER LOCK TYRE CHANGERS Professional tyre changer for intensive use, it offers all the features requested by the most demanding operators and tyre specialists. Its hydraulic bead loosener enables the user to handle every kind... Read More

    S106T.24ELX – S104T.24ELX – S100T.24ELX

    TULIP LOCKING SYSTEM Professional tyre changer for intensive use, it offers all the features requested by the most demanding operators and tyre specialists. Its hydraulic bead loosener enables the user to handle every kind of... Read More

Wheel Balancers:

    S2119RFM

    ELECTRONIC WHEEL BALANCERS WITH MICROPROCESSOR AUTOMATIC DISTANCE + DIAMETER MEASUREMENT Automatic spin when cover is lowered. The arm stores the positions for balancing correction: automatic programs for ALU S wheels. Guided rim/tyre optimisation process. Pedal... Read More

    S3140

    WHEEL BALANCERS WITH MICROPROCESSOR       TECHNICAL DATA Rim diameter 10” ÷ 30” 10” ÷ 26” Automatic Rim width 1.5” ÷ 22” kW Max wheel weight 70 kg Read-out accuracy 1 g Cycle time 6... Read More

    S4140RTLC – S3124HTLCD – S2120RTLC

    TRUCK WHEEL BALANCERS These versatile machines are designed for easy, fast and accurate balancing of motorcycle, car and commercial wheels. Microprocessor controlled with self-calibration and self-diagnostics. Specific balancing programs for static, dynamic and ALU wheels... Read More

    S2120M – S2120MC

    WHEEL BALANCERS WITH MICROPROCESSOR Motor spin   Spin by electric motor Mobile truck balancer for closed vans and trailers. Ideal for roadside tyre service, it is suitable for both truck and car tyres (with optional accessories).... Read More

    S1111H – S2116

    BIKE WHEEL BALANCERS   S 1111H Hand spin machine to accurately balance motorcycle and car wheels. Single launch measurement with low rotation speed. S 2116 Electronic computerised wheel balancer with high performances in terms of... Read More

    S2116R – S2117R – S2118R – S2119R – S111H

    WHEEL BALANCERS WITH INTERACTIVE KEYBOARD A low rotation speed balancer. Entry level model of the motorised range, the machine offers great value for money. Occupies a very limited space, it also gives professional performances. Guided... Read More

    S2124R -S2124RP

    WHEEL BALANCERS WITH MICROPROCESSOR The arm with weight pliers is designed for accurate and easy positioning of the weights on alloy rims and it stores the predetermined positions for balancing correction. Automatic programs for ALU... Read More

    S6160 – S4140

    ELECTRONIC WHEEL BALANCERS WITH MICROPROCESSOR   TOUCH SCREEN     Led light Led light     LASER POINTER (S)     SONAR (W)     QUICK PROGRAM SELECTION 7 programs can be selected by simply... Read More

Wheel Aligners:

    S504TWS

    With two front measuring heads equipped with 4 CCD sensors and two rear infra red transmitters, S504TWS makes it possible to carry out a quick and precise measurement of all steering angles on the front... Read More

    S808TWSR – S806TWSR – S808TWS – S806TWS

    Bluetooth transmission between front heads and cabinet Infrared transmission between sensor heads Double inclinometer to allow caster ADJUSTMENT without steering We recommend the new no run out clamps STDA92 enabling to skip run-out compensation procedure... Read More

    KLEVER 3D

    S300ATS - S300HP - S300S - S300

    LIFT LEVEL COMPENSATION Can be used on any 4 post or scissors lift. Automatic lift level compensation.     Quick clamp to the lift. Pivoting support to avoid damage with obstacles while lowering.    ... Read More

    S178WS – S176WS

    S178WS (8 CCD) S176WS (6 CCD) 8-CCD sensor (S178WS) or 6-CCD sensor (S176WS) wheel alignment. Infra-red transmission among measuring heads. Bluetooth transmission between front measuring heads and control unit. Maximum mobility between different working positions... Read More

    S220WS – S185WS

    S220WS 8CCD – Bluetooth Top of the range models. Infra-red transmission among measuring heads. Bluetooth transmission between front measuring heads and control unit. Equipped with 22” TFT colour monitor. Data Bluetooth transmission allows maximum mobility... Read More

    QUICK CONTROL

    QC2R REVERSE: Quick control stands are placed in the reception area.   Front targets and measuring heads are positionned – in just few seconds total toe and front camber are displayed.   Vehicle can move... Read More

    S508WS – S506WS

    S508WS Bluetooth – 8CCD S506WS Bluetooth – 6CCD Infra-red transmission among measuring heads. Bluetooth transmission between front measuring heads and control unit. Maximum mobility between different working positions thanks to the absence of cables and... Read More

    Aligner Connect

    SMARTPHONE REMOTE CONTROL The controls replicate the functions of the 5 keys (F1 thru F5), enabling the user to navigate the various screenpages and menus, no need to stand in front of the computer screen.... Read More

Lifts:

    SRM 62AGR – SRM 385H.2WSAGR

    MOBILE COLUMN LIFTS FOR TRACTORS ELECTRO-MECHANICAL SRM 62AGR Electro-mechanical mobile column lifts Pair of mobile columns to raise different tractors. The columns are equipped with S300A2. front and rear adapters. Perfect access to the vehicle.... Read More

    SRS 8500 – SRS 8600

    Lifts with flat platforms SRS 8601.60 / 6500 kg / 6000 mm SRS 8601.60LT / 6500 kg / 6000 mm / LIFT TABLE Lifts with large size platforms and sturdy structure assuring maximum rigidity and... Read More

    SR 235ELLK

    Lift for luxury sport cars. Equipped with 4 long two stage low profile arms for easy positionning under low ground clearance vehicles. Minimum height of the pads 76 mm. Arms produced in special steel to... Read More

    SRS 035L – 035LI

    SRS 035L / 3000 KG The minimum height from the floor guarantees easy and rapid positioning of the vehicle on the lift. The limited space required by the lift improves safety of the working area.... Read More

    Accessories

    for 2 Post Lift

    For Fiat Ducato, Peugeot Boxer, Citroën Jumper Spacers   For Fiat Ducato, Peugeot Boxer, Citroën Jumper Spacers       Arm Extension (For baseless lift, electromechanical synchronization, 4,2ton capacity, LIK arms – lift capacity reduced... Read More

    In ground truck lifts

    SRI 2150.4 With 4 posts and 2 hand-held control panels it is also possible to lift 2 vehicles separately. Due to synchronisation control as standard, the full capacity of supply can be seen clearly when... Read More

    SRQ

    Versions with flat platforms Main technical features The hydraulic cylinder is located inside the fixed platform and is thus perfectly protected High-resistant, galvanised and pre-stretched metal cables Large-diameter pulleys with self-lubricating and maintenance-free bushes Automatic... Read More

    SRS 8000

    No cross rails or torsion bars between lifting platforms. Maximum accessibility in the working area. Electronic synchronisation of the platforms, independently from the load distribution. Mechanical locking device with automatic engagement and pneumatic release, ensuring... Read More

    SRB 1394 – SRB 1396

    1394P - 1394T - 1394TP - 1396P - 1396E - 1396TP - 1396TE

    SRB1394 – SRB1394P Pantograph lift with foot-operated hydraulic pump (SRB1394) or with air-hydraulic pump (SRB1394P). Lifting height of 800 mm. The particular design of the run-up ramp allows easy rear wheel removal. Mechanical locking device... Read More

    SRS 7000

    COMMERCIAL VEHICLE SCISSORS LIFTS The best solution for a rational workshop: • space saving when lift is raised • obstacle free floor space when lift is fully lowered. No cross rails or torsion bars between... Read More

    SRM98H – SRM97H – SRM95H

    ELECTRO-HYDRAULIC MOBILE COLUMN LIFTS   Modular electrical systems enable alterations to be made to configuration (e.g. passing 4 to 6 to 8 columns or creating two set s of 4 columns by splitting a set... Read More

    SRM355HWS – SRM375HWS – SRM385HWS

    ELECTRO-HYDRAULIC WIRELESS MOBILE COLUMN LIFTS Control panel available on each column. All columns are identical. Configuration sets: 4-6-8 columns. Mechanical locking system/parking. Wireless 2.4 GHz communication among columns. Automatic selection of transmission channel with display... Read More

    SRM 12-22-32-42-62-72

    ELECTRO-MECHANICAL MOBILE COLUMN LIFTS Operating features Electronic system ensuring synchronization of all columns Master column: with all selection and controls. Slave column: with lifting and lowering controls and emergency stop button. Selection of several operating... Read More

    OPEN FRONT

    SRQ506OF - SRQ506OF LT

    Full access to the working area The 5700 mm long platforms and the large inner distance between posts allow optimum lifting of light commercial vehicles and long-wheelbase vans.   Wheel alignment versions SRQ506 OF Extra-long... Read More

    SRS 6352 – SRS 6351

    6352LT - 6352/46 - 6352/46LT - 6351LT

    SRS 6352 / 3500 kg Lifts for wheel alignment with front recesses for turntables and rear slip plates.   SRS 6352/46 / 3500 kg Wheel alignment version with long platforms: 4600mm   Rear slip plates... Read More

    SRS 1350 – 1400 – 1500 – 1600

    Lifts with flat platforms SERIE SRS 1350 / 3500 kg SERIE SRS 1400 / 4200 kg SERIE SRS 1500 / 5000 kg SERIE SRS 1600 / 6000 kg Lifts with large size platforms and sturdy... Read More

    SRB 1450 – 1380 – 1153

    SRB 1450 Electro-hydraulic scissors lift. The ideal lift for servicing tyres, brakes, suspension and bodywork. TECHNICAL DATA Capacity 3200 kg 3-phase motor 2,6 kW   SRB 1380 Pneumatic quick lift The traditional lift for tyre... Read More

    SRS 018 – 035 – 040

    LOW PROFILE SCISSOR LIFTS   SRS 018 / 3000 kg The minimum height from the floor guarantees easy and rapid positioning of the vehicle on the lift. The limited space required by the lift improves... Read More

    SRI

    120M - 125 - 125M - 110NK - 155 - 140 - 131 - 132

    Electro-hydraulic lifts designed for recessed installation; Perfect synchronization between cylinders regardless of load distribution; Mechanical locking device with automatic engagement and pneumatic release, ensuring maximum safety when lift is in standing position; Self-controlled lowering speed;... Read More

    SRH370.55 LIKT/LIKTA – SRH370.70 LIKT/LIKTA

    Mechanical safety latch with automatic engagement ensuring maximum safety when lift is in standing position. Synchronization cables grant the levelling of the two carriages. Each column features a maintenance-free lifting cylinder.   SRH 370.55LIKT /... Read More

    SRH370

    .32 - .42 - .45 - .50

    Adjustable height.     SRH370.32 / 3200 kg Three – stage short arms for asymmetric lifting of large vehicles. Min. pad height 90 mm.   SRH370.32K / 3200 kg Arms suitable for quick drop-in extensions... Read More

    SR35 – 45 – 49 – 245 – SR50LIK

    SR45E – 3700 kg SR49E – 4200 kg Baseless lift, allows easy access into the working area. Three-stage short arms and two-stage long arms provide asymmetric lifting of vans and off-road vehicles-width between posts 2650... Read More

    SR36 – 37 – 41 – 15K – 25K

    Lifting height over 2 metres; Automatic and permanent nut lubrication system to guarantee efficient lubrication during lifting and descent; Main nut made of bronze (no plastic) with high resistance to wear, for greater safety; Steel high... Read More

    SR5 Baseless

    SR5.337 - SR5.349

    SR5.337W / 3200 kg Three – stage short arms for asymmetric lifting of large vehicles – min. pad height 95 mm. The electromechanical synchronisation keeps the carriages within an alignment of 20 mm.   SR5.337WK... Read More

    SR05C – SR06C

    SR05C2 / 2700 kg SR06C2 / 3200 kg Lift with base for easier installation on low quality floors. stabilising feet at the base of the posts; width between posts 2500mm; min. pad height of 95mm;... Read More

    SR05HE – 06HE – SR44HE

    SHAFT DRIVE Shaft transmission between posts through oil filled conic gear boxes requiring no maintenance     SR05HE / 2700 kg SR06HE / 3200 kg Exclusive lift with self supporting base – installation is possible... Read More

    SR24H2 – 26H – 27H – 29HE

    SHAFT DRIVE Shaft transmission between posts through oil filled conic gear boxes requiring no maintenance.     Main nut made of bronze (no plastic) with high resistance to wear, for greater safety; Steel high resistance... Read More

Test Lanes:

    Stand Alone Brake Tester

    SIRT003D - SIRT102 - SIRT095

    LED display, visible from far away, it allows easy testing and gives a modern look to the workshop. To be wall mounted. The electric box assembly includes a dedicated electronic board with microprocessor and the... Read More

    Play Detectors

    200 - 200I - 200/8 - 200/8I - 203 - 203I

    The equipment generates an alternate stress on the wheels and, therefore, on the organs of the steering wheel and suspensions, allowing a visual check of any defects (clearance of the spherical couplings, silent block, damper... Read More

    Commercial Vehicles Test Lanes

    The Sirio test and diagnosis system for commercial vehicles sets today’s standards for professional operators and test centres. Developed with modularity and user-friendliness in mind, this system incorporates latest-generation equipment in conformity with applicable safety... Read More

    Test Lanes

    The Sirio test and diagnosis system for cars and light commercial vehicles sets today’s standards for professional operators and test centres. Developed with modularity and user-friendliness in mind, this system incorporates latest-generation equipment in conformity... Read More

Other Products:

    KT 100L

    Lifting platform for assembly and removal of vehicle parts The aggregate lifting table can be used universally, thus making it excellent for safely removing and installing engines, gearboxes, HV batteries and chassis components from a... Read More

    KT 100

    Lifting platform for assembly and removal of vehicle parts The aggregate lifting table can be used universally, thus making it excellent for safely removing and installing engines, gearboxes, HV batteries and chassis components from a... Read More

    Tire tread measurement

    SI WS101 - 102 - 103

    Tread depth is measured as the vehicle passes over the Profiler at a max. speed of 8 km/h (5 mph). Measuring system: Stereo cameras plus laser blade. Measurement results are available within seconds. Designed with... Read More

    Tyre Service Equipment

    WHEEL LIFT   GR80WS – 60 KG WIRELESS GR80WS is suitable for mounting and also transporting wheels. Maintenance-free lifting spindle. Drive is by a powerful electric motor with integrated safety brakes. The double battery allows... Read More

    Pit lifts, suspended

    J150.8F – 15T Intuitive operation includes a quick lift via push button, additional load lift by means of an air motor, a fine lift with a pump rod and a lowering via hand lever. The... Read More

    NITROGEN GENERATOR

    SNG 3000 l/h The nitrogen generator SNG requires only compressed air for functioning. It produces a nitrogen-enriched mixture at low costs and it allows the amortization of the device in a short time (while the... Read More

    TYRE INFLATION

    AUTOMATIC DIGITAL INFLATOR Equipped with a metal keypad to guarantee durability and resistance to wear. To achieve perfect inflation it is simply a matter of keying in the required pressure and pressing a button: the... Read More

    Engine Stands

    Engine Stands   R10: 500 kg R12: 800 kg R11: 1.200 kg    

    Headlight Beam Tester

    CFD102 - CFD103 - CFD103R

    CFD102   Mechanical headlight beam setter with digital luxmeter, based on wheels, laser visor, laser pointing system. Laser Visor + Laser pointing system       LUCES HALÓGENOS, XENON, LED: la combinación de la nueva... Read More

    Jacks

    SC 20L: kg. 2.000, Min. H 80 mm, Max. H 495 mm EXTRA FLAT SL 40L: kg. 4.000, Min. H 140 mm, Max. H 600 mm SL 60L: kg. 6.000, Min. H 140 mm, Max. H 600 mm SA 50: kg. 5.000, Min. H 140 mm, Max.... Read More