Collegamenti
- Tyre Changers
- Wheel Balancers
- Wheel Aligners
- Lifts
- Electromechanical 2-Posts Lifts
- Electromechanical Two Posts Baseless Lifts
- Electro-Hydraulic 2 Post Lifts
- In-ground piston lifts
- Bike
- Low Profile Double Scissor Lift
- Double scissor lifts
- Mid-rise Lifts
- Scissor Lifts Electro-Hydraulic
- 4 Posts Lifts Electro-Hydraulic
- Mobile Columns
- In Ground Truck Lifts
- Commercial Vehicle Platform Lifts
- 4 Post Lifts Electro-Mechanical
- Test Lanes
- Other Products
J150.8F – 15T
Intuitive operation includes a quick lift via push button, additional load lift by means of an air motor, a fine lift with a pump rod and a lowering via hand lever.
The extra-long cylinder guide ensures that lateral forces can be absorbed, even when loads are outside the center.
2 layer coating for perfect corrosion protection.
Longevity – Piston rod and pump piston are hard-chrome plated against corrosion and wear.
Anti-rust prevention – During each lifting and lowering movement piston rod and inner cylinder wall are moistened with oil.
The forced return allows a quick return of the lifting ram with and without load to the lowest position.
Needle bearing mounted undercarriage castors with grease nipple.
![]() |
The piston rod is slightly wetted with oil to protect against corrosion. |
![]() |
Undercarriage castors are covered against damage. |
Capacity | 15t | |
Stroke | 800 mm | |
Mounting hole | 55 mm | |
A | Undercarriage width | 800-1100 mm |
B | Undercarriage height | 285 mm |
Operating pressure | 10 bar | |
Weight | 285 kg | |
Piston rod diameter | 80 mm |
Perfect positionning under the vehicle
OPTIONS
![]() |
SJA1 – 1.000 kgAngular adjustment +/- 12°. |
![]() |
SJA2 – 15T |
![]() |
SJA3 – 15T |
![]() |
SJA4 – 3.200 kgTraverse and pads for transporters |
![]() SJA5Set of the pads |
![]() SJA6Condensate separator |